TPI INJECTOR MOVE KIT FIRST VERSION ****LAST PIECES AVAILABLE****

Avalable for TPI and TBI models 150/250/300.

Adapter plate for transferring the injectors in models with TPI system directly into the reed valve.
The original control unit (ECU) is used and the mixer remains.
Now you can pre-mix gasoline with oil like a normal carbureted engine. The fuel mixture passes through the crankcase and effectively lubricates the crankshaft, piston and connecting rod.
Power is increased throughout the medium-range delivery curve without losing lubrication efficiency.

Installation guide and tips:
make sure all parts are thoroughly cleaned before installation.
To move the injectors, the fuel tank and expansion chamber must be removed. Remove the bracket connecting the cylinder head to the frame. Remove the reed valve pack by undoing the four bolts holding the valve. Then connect the new adapter to the reed pack. Place the injectors directly on the new plate. Apply some lubricating grease to the o-rings. Connect the fuel supply line. Insert the special plugs in place of the original injectors, which are located on the cylinder.
We recommend installing the Tpi idle adjustment screw for optimum carburetion adjustment. After having adjusted the idle speed and the air screw, reset the throttle body position sensor. After that, absolutely do not move the minimum Tpi adjustment knob.